DIR~: usr/lib64/perl5/vendor_perl/Compress

Upload File

Edit File: Bzip2.pm

# File : Bzip2.pm # Author : Rob Janes # Created : 14 April 2005 # Version : 2.26 # # Copyright (c) 2005 Rob Janes. All rights reserved. # This program is free software; you can redistribute it and/or # modify it under the same terms as Perl itself. # package Compress::Bzip2; use 5.006; our $VERSION = "2.26"; use strict; use warnings; use Carp; use Getopt::Std; use Fcntl qw(:DEFAULT :mode); require Exporter; use AutoLoader; our @ISA = qw(Exporter); # Items to export into callers namespace by default. Note: do not export # names by default without a very good reason. Use EXPORT_OK instead. # Do not simply export all your public functions/methods/constants. # This allows declaration use Compress::Bzip2 ':all'; # If you do not need this, moving things directly into @EXPORT or @EXPORT_OK # will save memory. our %EXPORT_TAGS = ( 'constants' => [ qw( BZ_CONFIG_ERROR BZ_DATA_ERROR BZ_DATA_ERROR_MAGIC BZ_FINISH BZ_FINISH_OK BZ_FLUSH BZ_FLUSH_OK BZ_IO_ERROR BZ_MAX_UNUSED BZ_MEM_ERROR BZ_OK BZ_OUTBUFF_FULL BZ_PARAM_ERROR BZ_RUN BZ_RUN_OK BZ_SEQUENCE_ERROR BZ_STREAM_END BZ_UNEXPECTED_EOF ) ], 'utilities' => [ qw( &bzopen &bzinflateInit &bzdeflateInit &memBzip &memBunzip &compress &decompress &bzip2 &bunzip2 &bzlibversion $bzerrno ) ], 'bzip1' => [ qw( &compress &decompress &compress_init &decompress_init &version ) ], 'gzip' => [ qw( &gzopen &inflateInit &deflateInit &compress &uncompress &adler32 &crc32 ZLIB_VERSION $gzerrno Z_OK Z_STREAM_END Z_NEED_DICT Z_ERRNO Z_STREAM_ERROR Z_DATA_ERROR Z_MEM_ERROR Z_BUF_ERROR Z_VERSION_ERROR Z_NO_FLUSH Z_PARTIAL_FLUSH Z_SYNC_FLUSH Z_FULL_FLUSH Z_FINISH Z_BLOCK Z_NO_COMPRESSION Z_BEST_SPEED Z_BEST_COMPRESSION Z_DEFAULT_COMPRESSION Z_FILTERED Z_HUFFMAN_ONLY Z_RLE Z_DEFAULT_STRATEGY Z_BINARY Z_ASCII Z_UNKNOWN Z_DEFLATED Z_NULL ) ], ); our @EXPORT_OK = ( @{ $EXPORT_TAGS{'utilities'} }, @{ $EXPORT_TAGS{'constants'} }, @{ $EXPORT_TAGS{'bzip1'} }, @{ $EXPORT_TAGS{'gzip'} }, ); $EXPORT_TAGS{'all'} = [ @EXPORT_OK ]; our @EXPORT = ( @{ $EXPORT_TAGS{'utilities'} }, @{ $EXPORT_TAGS{'constants'} } ); our $bzerrno = ""; our $gzerrno; *gzerrno = \$bzerrno; # Zlib compatibility ## use constant ZLIB_VERSION => '1.x'; # allowed flush values use constant { Z_NO_FLUSH => 0, Z_PARTIAL_FLUSH => 1, Z_SYNC_FLUSH => 2, Z_FULL_FLUSH => 3, Z_FINISH => 4, Z_BLOCK => 5 }; # return codes for functions, positive normal, negative error use constant { Z_OK => 0, Z_STREAM_END => 1, Z_NEED_DICT => 2, Z_ERRNO => -1, Z_STREAM_ERROR => -2, Z_DATA_ERROR => -3, Z_MEM_ERROR => -4, Z_BUF_ERROR => -5, Z_VERSION_ERROR => -6 }; # compression levels use constant { Z_NO_COMPRESSION => 0, Z_BEST_SPEED => 1, Z_BEST_COMPRESSION => 9, Z_DEFAULT_COMPRESSION => -1 }; # compression strategy, for deflateInit use constant { Z_FILTERED => 1, Z_HUFFMAN_ONLY => 2, Z_RLE => 3, Z_DEFAULT_STRATEGY => 0 }; # possible values of data_type (inflate) use constant { Z_BINARY => 0, Z_ASCII => 1, Z_UNKNOWN => 2 }; # the deflate compression method use constant Z_DEFLATED => 8; # for initialization use constant Z_NULL => 0; ## gzopen, $gzerror, gzerror, gzclose, gzreadline, gzwrite sub AUTOLOAD { # This AUTOLOAD is used to 'autoload' constants from the constant() # XS function. my $constname; our $AUTOLOAD; ($constname = $AUTOLOAD) =~ s/.*:://; croak "&Compress::Bzip2::constant not defined" if $constname eq 'constant'; my ($error, $val) = constant($constname); if ($error) { croak $error; } { no strict 'refs'; # Fixed between 5.005_53 and 5.005_61 #XXX if ($] >= 5.00561) { #XXX *$AUTOLOAD = sub () { $val }; #XXX } #XXX else { *$AUTOLOAD = sub { $val }; #XXX } } goto &$AUTOLOAD; } require XSLoader; XSLoader::load('Compress::Bzip2', $VERSION); #bootstrap Compress::Bzip2 $VERSION; ############################################################################## ## file compress uncompress commands sub _writefileopen ( $$;$ ) { ## open a protected file for write my ( $handle, $filename, $force ) = @_; if ( sysopen($handle, $filename, $force ? O_WRONLY|O_CREAT|O_TRUNC : O_WRONLY|O_CREAT|O_EXCL, S_IWUSR|S_IRUSR) ) { $_[0] = $handle if !defined($_[0]); return $handle; } return undef; } sub _stat_snapshot ( $ ) { my ( $filename ) = @_; return undef if !defined($filename); my @stats = stat $filename; if (!@stats) { warn "stat of $filename failed: $!\n" if !@stats; return undef; } return \@stats; } sub _check_stat ( $$;$ ) { my ( $filename, $statsnap, $force ) = @_; if ( !defined($statsnap) || (ref($statsnap) eq 'ARRAY' && @$statsnap == 0) ) { $statsnap = _stat_snapshot( $filename ); if ( $statsnap ) { if ( @_>1 ) { if ( !defined($_[1]) ) { $_[1] = $statsnap; } elsif ( ref($_[1]) eq 'ARRAY' && @{ $_[1] } == 0 ) { @{ $_[1] } = @$statsnap; } } } else { return undef; } } if ( S_ISDIR( $statsnap->[2] ) ) { bz_seterror( &BZ_IO_ERROR, "file $filename is a directory" ); return 0; } if ( !S_ISREG( $statsnap->[2] ) ) { bz_seterror( &BZ_IO_ERROR, "file $filename is not a normal file" ); return 0; } if ( !$force && S_ISLNK( $statsnap->[2] ) ) { bz_seterror( &BZ_IO_ERROR, "file $filename is a symlink" ); return 0; } if ( !$force && $statsnap->[3] > 1 ) { bz_seterror( &BZ_IO_ERROR, "file $filename has too many hard links" ); return 0; } return 1; } sub _set_stat_from_snapshot ( $$ ) { my ( $filename, $statsnap ) = @_; if ( !chmod( S_IMODE( $statsnap->[2] ), $filename ) ) { bz_seterror( &BZ_IO_ERROR, "chmod ".sprintf('%03o', S_IMODE( $statsnap->[2] ))." $filename failed: $!" ); return undef; } if ( !utime @$statsnap[8,9], $filename ) { bz_seterror( &BZ_IO_ERROR, "utime " . join(' ',map { strftime('%Y-%m-%d %H:%M:%S', localtime $_) } @$statsnap[8,9] ) . " $filename failed: $!" ); return undef; } if ( !chown @$statsnap[4,5], $filename ) { bz_seterror( &BZ_IO_ERROR, "chown " . join(':', ( getpwuid($statsnap->[4]) )[0], ( getgrgid($statsnap->[5]) )[0]) . " $filename failed: $!" ); return 0; } return 1; } sub bzip2 ( @ ) { return _process_files( 'bzip2', 'cfvks123456789', @_ ); } sub bunzip2 ( @ ) { return _process_files( 'bunzip2', 'cdzfks123456789', @_ ); } sub bzcat ( @ ) { return _process_files( 'bzcat', 'cdzfks123456789', @_ ); } sub _process_files ( @ ) { my $command = shift; my $opts = shift; local @ARGV = @_; my %opts; return undef if !getopt( $opts, \%opts ); # c compress or decompress to stdout # d decompress # z compress # f force # v verbose # k keep # s small # 123456789 $opts{c} = 1 if $command eq 'bzcat'; $opts{d} = 1 if $command eq 'bunzip2' || $command eq 'bzcat'; $opts{z} = 1 if $command eq 'bzip2'; my $read_from_stdin; my ( $in, $bzin ); my ( $out, $bzout ); if ( !@ARGV ) { $read_from_stdin = 1; $opts{c} = 1; if ( !open( $in, "<&STDIN" ) ) { die "Error: failed to input from STDIN: '$!'\n"; } $bzin = bzopen( $in, "r" ); } if ( $opts{c} ) { if ( !open( $out, ">&STDOUT" ) ) { die "Error: failed to output to STDOUT: '$!'\n"; } $bzout = bzopen( $out, "w" ); } if ( !$opts{d} && !$opts{z} ) { die "Error: neither compress nor decompress was indicated.\n"; } my $doneflag = 0; while ( !$doneflag ) { my $infile; my $outfile; my @statbuf; if ( !$read_from_stdin ) { $infile = shift @ARGV; if ( ! -r $infile ) { print STDERR "Error: file $infile is not readable\n"; next; } @statbuf = stat _; if ( !@statbuf ) { print STDERR "Error: failed to stat $infile: '$!'\n"; next; } if ( !_check_stat( $infile, \@statbuf, $opts{f} ) ) { print STDERR "Error: file $infile stat check fails: $bzerrno\n"; next; } } my $outfile_exists; if ( !$opts{c} ) { undef $out; if ( $opts{d} ) { $outfile = $infile . '.bz2'; } elsif ( $opts{z} ) { $outfile = $infile =~ /\.bz2$/ ? substr($infile,0,-4) : $infile.'.out'; } $outfile_exists = -e $outfile; if ( !_writefileopen( $out, $outfile, $opts{f} ) ) { print STDERR "Error: failed to open $outfile for write: '$!'\n"; next; } } if ( !$read_from_stdin ) { undef $in; if ( !open( $in, $infile ) ) { print STDERR "Error: unable to open $infile: '$!'\n"; unlink( $outfile ) if !$outfile_exists; next; } } if ( $opts{d} ) { $bzin = bzopen( $in, "r" ) if !$read_from_stdin; my $buf; my $notdone = 1; while ( $notdone ) { my $ln = bzread( $in, $buf, 1024 ); if ( $ln > 0 ) { syswrite( $out, $buf, $ln ); } elsif ( $ln == 0 ) { undef $notdone; } else { } } close($out); if ( !$read_from_stdin ) { bzclose($in); unlink( $infile ) if !$opts{k}; _set_stat_from_snapshot( $outfile, \@statbuf ); } } elsif ( $opts{z} ) { $bzout = bzopen( $out, "w" ) if !$opts{c}; my $buf; my $notdone = 1; while ( $notdone ) { my $ln = sysread( $in, $buf, 1024 ); if ( $ln > 0 ) { bzwrite( $bzout, $buf, $ln ); } elsif ( $ln == 0 ) { undef $notdone; } else { } } close($in); if ( !$opts{c} ) { bzclose($bzout); unlink( $infile ) if !$opts{k}; _set_stat_from_snapshot( $outfile, \@statbuf ); } } } } ############################################################################## ############################################################################## ## compatibility with Compress::Bzip2 1.03 sub add ( $$ ) { my ( $obj, $buffer ) = @_; my @res = $obj->is_write ? $obj->bzdeflate( $buffer ) : $obj->bzinflate( $buffer ); return $res[0]; } sub finish ( $;$ ) { my ( $obj, $buffer ) = @_; my ( @res, $out ); if ( defined($buffer) ) { @res = $obj->is_write ? $obj->bzdeflate( $buffer ) : $obj->bzinflate( $buffer ); return undef if $res[1] != &BZ_OK; $out = $res[0]; } $out = '' if !defined($out); @res = $obj->bzclose; return undef if $res[1] != &BZ_OK; return $out.$res[0]; } sub input_size ( $ ) { my ( $obj ) = @_; return $obj->total_in; } sub output_size ( $ ) { my ( $obj ) = @_; return $obj->total_out; } sub version ( ) { return bzlibversion(); } sub error ( $ ) { return $_[0]->bzerror; } ############################################################################## ############################################################################## ## THE Compress::Zlib compatibility section sub _bzerror2gzerror { my ( $bz_error_num ) = @_; my $gz_error_num = $bz_error_num == &BZ_OK ? Z_OK : $bz_error_num == &BZ_RUN_OK ? Z_OK : $bz_error_num == &BZ_FLUSH_OK ? Z_STREAM_END : $bz_error_num == &BZ_FINISH_OK ? Z_STREAM_END : $bz_error_num == &BZ_STREAM_END ? Z_STREAM_END : $bz_error_num == &BZ_SEQUENCE_ERROR ? Z_VERSION_ERROR : $bz_error_num == &BZ_PARAM_ERROR ? Z_ERRNO : $bz_error_num == &BZ_MEM_ERROR ? Z_MEM_ERROR : $bz_error_num == &BZ_DATA_ERROR ? Z_DATA_ERROR : $bz_error_num == &BZ_DATA_ERROR_MAGIC ? Z_DATA_ERROR : $bz_error_num == &BZ_IO_ERROR ? Z_ERRNO : $bz_error_num == &BZ_UNEXPECTED_EOF ? Z_STREAM_ERROR : $bz_error_num == &BZ_OUTBUFF_FULL ? Z_BUF_ERROR : $bz_error_num == &BZ_CONFIG_ERROR ? Z_VERSION_ERROR : Z_VERSION_ERROR ; return $gz_error_num; } sub gzopen ( $$ ) { goto &bzopen; } sub gzread ( $$;$ ) { goto &bzread; } sub gzreadline ( $$ ) { goto &bzreadline; } sub gzwrite ( $$ ) { goto &bzwrite; } sub gzflush ( $;$ ) { my ( $obj, $flush ) = @_; return Z_OK if $flush == Z_NO_FLUSH; goto &bzflush; } sub gzclose ( $ ) { goto &bzclose; } sub gzeof ( $ ) { goto &bzeof; } sub gzsetparams ( $$$ ) { ## ignore params my ( $obj, $level, $strategy ) = @_; return Z_OK; } sub gzerror ( $ ) { goto &bzerror; } sub deflateInit ( @ ) { ## ignore all options: ## -Level, -Method, -WindowBits, -MemLevel, -Strategy, -Dictionary, -Bufsize my @res = bzdeflateInit(); return $res[0] if !wantarray; return ( $res[0], _bzerror2gzerror( $res[1] ) ); } sub deflate ( $$ ) { my ( $obj, $buffer ) = @_; my @res = $obj->bzdeflate( $buffer ); return $res[0] if !wantarray; return ( $res[0], _bzerror2gzerror( $res[1] ) ); } sub deflateParams ( $;@ ) { ## ignore all options return Z_OK; } sub flush ( $;$ ) { my ( $obj, $flush_type ) = @_; $flush_type = Z_FINISH if !defined($flush_type); return Z_OK if $flush_type == Z_NO_FLUSH; my $bz_flush_type; my @res; $bz_flush_type = $flush_type == Z_PARTIAL_FLUSH || $flush_type == Z_SYNC_FLUSH ? &BZ_FLUSH : $flush_type == Z_FULL_FLUSH ? &BZ_FINISH : &BZ_FINISH; @res = $obj->bzflush( $bz_flush_type ); return $res[0] if !wantarray; return ( $res[0], _bzerror2gzerror( $res[1] ) ); } sub dict_adler ( $ ) { return 1; # ??? } sub msg ( $ ) { my ( $obj ) = @_; return ''.($obj->bzerror).''; # stringify } sub inflateInit ( @ ) { ## ignore all options: ## -WindowBits, -Dictionary, -Bufsize my @res = bzinflateInit(); return $res[0] if !wantarray; return ( $res[0], _bzerror2gzerror( $res[1] ) ); } sub inflate ( $$ ) { my ( $obj, $buffer ) = @_; my @res = $obj->bzinflate( $buffer ); return $res[0] if !wantarray; return ( $res[0], _bzerror2gzerror( $res[1] ) ); } sub inflateSync ( $ ) { return Z_VERSION_ERROR; # ?? what } sub memGzip ( $ ) { goto &memBzip; } sub memGunzip ( $ ) { goto &memBunzip; } sub adler32 ( $;$ ) { return 0; } sub crc32 ( $;$ ) { return 0; } # sub compress ( $;$ ) { # ## ignore $level # my ( $source, $level ) = @_; # return memBzip( $source ); # } sub uncompress ( $ ) { my ( $source, $level ) = @_; return memBunzip( $source ); } # Autoload methods go after =cut, and are processed by the autosplit program. 1; __END__ =pod =head1 NAME Compress::Bzip2 - Interface to Bzip2 compression library =head1 SYNOPSIS use Compress::Bzip2 qw(:all :constant :utilities :gzip); ($bz, $status) = bzdeflateInit( [PARAMS] ); ($out, $status) = $bz->bzdeflate($buffer) ; # compress ($bz, $status) = bzinflateInit( [PARAMS] ); ($out, $status) = $bz->bzinflate($buffer); # uncompress ($out, $status) = $bz->bzflush() ; ($out, $status) = $bz->bzclose() ; $dest = memBzip($source); alias compress $dest = memBunzip($source); alias decompress $bz = Compress::Bzip2->new( [PARAMS] ); $bz = bzopen($filename or filehandle, $mode); alternate, with $bz created by new(): $bz->bzopen($filename or filehandle, $mode); $bytesread = $bz->bzread($buffer [,$size]) ; $bytesread = $bz->bzreadline($line); $byteswritten = $bz->bzwrite($buffer [,$limit]); $errstring = $bz->bzerror(); $status = $bz->bzeof(); $status = $bz->bzflush(); $status = $bz->bzclose() ; $status = $bz->bzsetparams( $param => $setting ); $bz->total_in() ; $bz->total_out() ; $verstring = $bz->bzversion(); $Compress::Bzip2::bzerrno =head1 DESCRIPTION The I<Compress::Bzip2> module provides a Perl interface to the B<bzip2> compression library (see L</AUTHOR> for details about where to get I<Bzip2>). A relevant subset of the functionality provided by I<bzip2> is available in I<Compress::Bzip2>. All string parameters can either be a scalar or a scalar reference. The module can be split into two general areas of functionality, namely in-memory compression/decompression and read/write access to I<bzip2> files. Each of these areas will be discussed separately below. B<NOTE> I<Compress::Bzip2> is just a simple I<bzip2> binding, comparable to the old L<Compress::Zlib> library. It is not well integrated into PerlIO, use the preferred L<IO::Compress::Bzip2> instead. =head1 FILE READ/WRITE INTERFACE A number of functions are supplied in I<bzlib> for reading and writing I<bzip2> files. Unfortunately, most of them are not suitable. So, this module provides another interface, built over top of the low level bzlib methods. =head2 B<$bz = bzopen(filename or filehandle, mode)> This function returns an object which is used to access the other I<bzip2> methods. The B<mode> parameter is used to specify both whether the file is opened for reading or writing, with "r" or "w" respectively. If a reference to an open filehandle is passed in place of the filename, it better be positioned to the start of a compression/decompression sequence. WARNING: With Perl 5.6 you cannot use a filehandle because of SEGV in destruction with bzclose or an implicit close. =head2 B<$bz = Compress::Bzip2-E<gt>new( [PARAMS] )> Create a Compress::Bzip2 object. Optionally, provide compression/decompression parameters as a keyword => setting list. See I<bzsetparams()> for a description of the parameters. =head2 B<$bz-E<gt>bzopen(filename or filehandle, mode)> This is bzopen, but it uses an object previously created by the new method. Other than that, it is identical to the above bzopen. =head2 B<$bytesread = $bz-E<gt>bzread($buffer [, $size]) ;> Reads B<$size> bytes from the compressed file into B<$buffer>. If B<$size> is not specified, it will default to 4096. If the scalar B<$buffer> is not large enough, it will be extended automatically. Returns the number of bytes actually read. On EOF it returns 0 and in the case of an error, -1. =head2 B<$bytesread = $bz-E<gt>bzreadline($line) ;> Reads the next line from the compressed file into B<$line>. Returns the number of bytes actually read. On EOF it returns 0 and in the case of an error, -1. It IS legal to intermix calls to B<bzread> and B<bzreadline>. At this time B<bzreadline> ignores the variable C<$/> (C<$INPUT_RECORD_SEPARATOR> or C<$RS> when C<English> is in use). The end of a line is denoted by the C character C<'\n'>. =head2 B<$byteswritten = $bz-E<gt>bzwrite($buffer [, $limit]) ;> Writes the contents of B<$buffer> to the compressed file. Returns the number of bytes actually written, or 0 on error. If $limit is given and non-zero, then only that many bytes from $buffer will be written. =head2 B<$status = $bz-E<gt>bzflush($flush) ;> Flushes all pending output to the compressed file. Works identically to the I<zlib> function it interfaces to. Note that the use of B<bzflush> can degrade compression. Returns C<BZ_OK> if B<$flush> is C<BZ_FINISH> and all output could be flushed. Otherwise the bzlib error code is returned. Refer to the I<bzlib> documentation for the valid values of B<$flush>. =head2 B<$status = $bz-E<gt>bzeof() ;> Returns 1 if the end of file has been detected while reading the input file, otherwise returns 0. =head2 B<$bz-E<gt>bzclose> Closes the compressed file. Any pending data is flushed to the file before it is closed. =head2 B<$bz-E<gt>bzsetparams( [PARAMS] );> Change settings for the deflate stream C<$bz>. The list of the valid options is shown below. Options not specified will remain unchanged. =over 5 =item B<-verbosity> Defines the verbosity level. Valid values are 0 through 4, The default is C<-verbosity =E<gt> 0>. =item B<-blockSize100k> For bzip object opened for stream deflation or write. Defines the buffering factor of compression method. The algorithm buffers all data until the buffer is full, then it flushes all the data out. Use -blockSize100k to specify the size of the buffer. Valid settings are 1 through 9, representing a blocking in multiples of 100k. Note that each such block has an overhead of leading and trailing synchronization bytes. bzip2 recovery uses this information to pull useable data out of a corrupted file. A streaming application would probably want to set the blocking low. =item B<-workFactor> For bzip object opened for stream deflation or write. The workFactor setting tells the deflation algorithm how much work to invest to compensate for repetitive data. workFactor may be a number from 0 to 250 inclusive. The default setting is 30. See the bzip documentation for more information. =item B<-small> For bzip object opened for stream inflation or read. B<small> may be 0 or 1. Set C<small> to one to use a slower, less memory intensive algorithm. =back =head2 B<$bz-E<gt>bzerror> Returns the I<bzlib> error message or number for the last operation associated with B<$bz>. The return value will be the I<bzlib> error number when used in a numeric context and the I<bzlib> error message when used in a string context. The I<bzlib> error number constants, shown below, are available for use. BZ_CONFIG_ERROR BZ_DATA_ERROR BZ_DATA_ERROR_MAGIC BZ_FINISH BZ_FINISH_OK BZ_FLUSH BZ_FLUSH_OK BZ_IO_ERROR BZ_MAX_UNUSED BZ_MEM_ERROR BZ_OK BZ_OUTBUFF_FULL BZ_PARAM_ERROR BZ_RUN BZ_RUN_OK BZ_SEQUENCE_ERROR BZ_STREAM_END BZ_UNEXPECTED_EOF =head2 B<$bz-E<gt>bzclearerr> =head2 B<$bzerrno> The B<$bzerrno> scalar holds the error code associated with the most recent I<bzip2> routine. Note that unlike B<bzerror()>, the error is I<not> associated with a particular file. As with B<bzerror()> it returns an error number in numeric context and an error message in string context. Unlike B<bzerror()> though, the error message will correspond to the I<bzlib> message when the error is associated with I<bzlib> itself, or the UNIX error message when it is not (i.e. I<bzlib> returned C<Z_ERRORNO>). As there is an overlap between the error numbers used by I<bzlib> and UNIX, B<$bzerrno> should only be used to check for the presence of I<an> error in numeric context. Use B<bzerror()> to check for specific I<bzlib> errors. The I<bzcat> example below shows how the variable can be used safely. =head2 B<$bz-E<gt>prefix> Returns the additional 5 byte header which is prepended to the bzip2 header starting with C<BZh> when using memBzip/compress. =head1 Compress::Bzip2 Utilities Options: -d -c -z -f -v -k -s -1..9 =head2 bzip2( [OPTS], filename) =head2 bunzip2(filename) =head2 bzcat(filenames...) =head2 bzlibversion() =head2 bzinflateInit( opts... ) =head1 Internal Utilties =head2 bz_seterror(errno, msg) =head2 $bz-E<gt>is_read() =head2 $bz-E<gt>is_stream() =head2 $bz-E<gt>is_write() =head2 $bz-E<gt>total_in() =head2 $bz-E<gt>total_out() =head2 version() =head1 Compress::Bzip2 1.03 COMPATIBILITY While the 2.x thread forked off of 1.00, another line of development came to a head at 1.03. The 1.03 version worked with bzlib 1.0.2, had improvements to the error handling, single buffer inflate/deflate, a streaming interface to inflate/deflate, and a cpan style test suite. =head2 B<$dest = compress( $string, [$level] )> Alias to L<memBzip>, this compresses string, using the optional compression level, 1 through 9, the default being 6. Returns a string containing the compressed data. On error I<undef> is returned. =head2 B<$dest = decompress($string, [$level])> Alias to L<memBunzip>, this decompresses the data in string, returning a string containing the decompressed data. On error I<undef> is returned. =head2 uncompress($string, [$level]) Another alias to L<memBunzip> =head2 B<$stream = compress_init( [PARAMS] )> Alias to bzdeflateInit. In addition to the named parameters documented for bzdeflateInit, the following are accepted: -level, alias to -blockSize100k -buffer, to set the buffer size. The -buffer option is ignored. The intermediate buffer size is not changeable. =head2 B<$stream = decompress_init( [PARAMS] )> Alias to bzinflateInit. See bzinflateInit for a description of the parameters. The option "-buffer" is accepted, but ignored. =head2 B<$output = $stream-E<gt>add( $string )> Add data to be compressed/decompressed. Returns whatever output is available (possibly none, if it's still buffering it), or undef on error. =head2 B<$output = $stream-E<gt>finish( [$string] )> Finish the operation; takes an optional final data string. Whatever is returned completes the output; returns undef on error. =head2 B<$stream-E<gt>error> Like the function, but applies to the current object only. Note that errors in a stream object are also returned by the function. =head2 B<$stream-E<gt>input_size> Alias to total_in. Total bytes passed to the stream. =head2 B<$stream-E<gt>output_size> Alias to total_out. Total bytes received from the stream. =head1 GZIP COMPATIBILITY INTERFACE Except for the exact state and error numbers, this package presents an interface very much like that given by the Compress::Zlib package. Mostly, if you take the method name, state or error number from Compress::Zlib and replace the "g" with a "b", your code should work. To make the interoperability even easier, all the Compress::Zlib method names have been used as aliases or cover functions for the bzip2 methods. Therefore, most code that uses Compress::Zlib should be able to use this package, with a one line change. Simply change $gz = Compress::Zlib::gzopen( "filename", "w" ); to $gz = Compress::Bzip2::gzopen( "filename", "w" ); Some of the Compress::Zlib aliases don't return anything useful, like crc32 or adler32, cause bzip2 doesn't do that sort of thing. =head2 B< $gz = gzopen( $filename, $mode ) > Alias for bzopen. =head2 B< $gz-E<gt>gzread( $buffer, [ $length ] ) > Alias for bzread. =head2 B< $gz-E<gt>gzreadline( $buffer ) > Alias for bzreadline. =head2 B< $gz-E<gt>gzwrite( $buffer ) > Alias for bzwrite. =head2 B< $gz-E<gt>gzflush( [$flushtype] ) > Alias for bzflush, with return code translation. =head2 B< $gz-E<gt>gzclose( ) > Alias for bzclose. =head2 B< $gz-E<gt>gzeof( ) > Alias for bzeof. =head2 B< $gz-E<gt>gzerror( ) > Alias for bzerror. =head2 B< $gz-E<gt>gzsetparams( $level, $strategy ) > This is a no-op. =head2 B< $d = deflateInit( [OPTS] ) > Alias for bzdeflateInit, with return code translation. All OPTS are ignored. =head2 B< $d-E<gt>deflate( $buffer ) > Alias for bzdeflate, with return code translation. =head2 B< $d-E<gt>deflateParams( [OPTS] ) > This is a no-op. =head2 B< $d-E<gt>flush( [$flushtype] ) > Cover function for bzflush or bzclose, depending on $flushtype. See the Compress::Zlib documentation for more information. =head2 B< $d-E<gt>dict_adler( ) > This is a no-op. =head2 B< $d-E<gt>msg( ) > This is a no-op. =head2 B< $d = inflateInit( [OPTS] ) > Alias for bzinflateInit, with return code translation. All OPTS are ignored. =head2 B< $d-E<gt>inflate( ) > Alias for bzinflate, with return code translation. =head2 B< $d-E<gt>inflateSync( ) > This is a no-op. =head2 B< $d-E<gt>adler32( $crc ) > This is a no-op. =head2 B< $d-E<gt>crc32( $crc ) > This is a no-op. =head2 B< $buffer = memGzip( $buffer ) > Alias for memBzip. =head2 B< $buffer = memGunzip( $buffer ) > Alias for memBunzip. =head1 IN-MEMORY COMPRESS/UNCOMPRESS Two high-level functions are provided by I<bzlib> to perform in-memory compression. They are B<memBzip> and B<memBunzip>. Two Perl subs are provided which provide similar functionality. =head2 B<$compressed = memBzip($buffer);> Compresses B<$buffer>. If successful it returns the compressed data. Otherwise it returns I<undef>. The buffer parameter can either be a scalar or a scalar reference. Essentially, an in-memory bzip file is created. It creates a minimal bzip header, which adds 5 bytes before the bzip2 specific BZh header. =head2 B<$uncompressed = memBunzip($buffer);> Uncompresses B<$buffer>. If successful it returns the uncompressed data. Otherwise it returns I<undef>. The source buffer can either be a scalar or a scalar reference. The buffer parameter can either be a scalar or a scalar reference. The contents of the buffer parameter are destroyed after calling this function. =head1 STREAM DEFLATE (= COMPRESS) The Perl interface will I<always> consume the complete input buffer before returning. Also the output buffer returned will be automatically grown to fit the amount of output available. Here is a definition of the interface available: =head2 B<($d, $status) = bzdeflateInit( [PARAMS] )> Initialises a deflation stream. If successful, it will return the initialised deflation stream, B<$d> and B<$status> of C<BZ_OK> in a list context. In scalar context it returns the deflation stream, B<$d>, only. If not successful, the returned deflation stream (B<$d>) will be I<undef> and B<$status> will hold the exact I<bzip2> error code. The function optionally takes a number of named options specified as C<-Name=E<gt>value> pairs. This allows individual options to be tailored without having to specify them all in the parameter list. Here is a list of the valid options: =over 5 =item B<-verbosity> Defines the verbosity level. Valid values are 0 through 4, The default is C<-verbosity =E<gt> 0>. =item B<-blockSize100k> Defines the buffering factor of compression method. The algorithm buffers all data until the buffer is full, then it flushes all the data out. Use -blockSize100k to specify the size of the buffer. Valid settings are 1 through 9, representing a blocking in multiples of 100k. Note that each such block has an overhead of leading and trailing synchronization bytes. bzip2 recovery uses this information to pull useable data out of a corrupted file. A streaming application would probably want to set the blocking low. =item B<-workFactor> The workFactor setting tells the deflation algorithm how much work to invest to compensate for repetitive data. workFactor may be a number from 0 to 250 inclusive. The default setting is 30. See the bzip documentation for more information. =back Here is an example of using the B<deflateInit> optional parameter list to override the default buffer size and compression level. All other options will take their default values. bzdeflateInit( -blockSize100k => 1, -verbosity => 1 ); =head2 B<($out, $status) = $d-E<gt>bzdeflate($buffer)> Deflates the contents of B<$buffer>. The buffer can either be a scalar or a scalar reference. When finished, B<$buffer> will be completely processed (assuming there were no errors). If the deflation was successful it returns deflated output, B<$out>, and a status value, B<$status>, of C<Z_OK>. On error, B<$out> will be I<undef> and B<$status> will contain the I<zlib> error code. In a scalar context B<bzdeflate> will return B<$out> only. As with the internal buffering of the I<deflate> function in I<bzip2>, it is not necessarily the case that any output will be produced by this method. So don't rely on the fact that B<$out> is empty for an error test. In fact, given the size of bzdeflates internal buffer, with most files it's likely you won't see any output at all until flush or close. =head2 B<($out, $status) = $d-E<gt>bzflush([flush_type])> Typically used to finish the deflation. Any pending output will be returned via B<$out>. B<$status> will have a value C<BZ_OK> if successful. In a scalar context B<bzflush> will return B<$out> only. Note that flushing can seriously degrade the compression ratio, so it should only be used to terminate a decompression (using C<BZ_FLUSH>) or when you want to create a I<full flush point> (using C<BZ_FINISH>). The allowable values for C<flush_type> are C<BZ_FLUSH> and C<BZ_FINISH>. For a handle opened for "w" (bzwrite), the default is C<BZ_FLUSH>. For a stream, the default for C<flush_type> is C<BZ_FINISH> (which is essentially a close and reopen). It is strongly recommended that you only set the C<flush_type> parameter if you fully understand the implications of what it does. See the C<bzip2> documentation for details. =head2 Example Here is a trivial example of using B<bzdeflate>. It simply reads standard input, deflates it and writes it to standard output. use strict ; use warnings ; use Compress::Bzip2 ; binmode STDIN; binmode STDOUT; my $x = bzdeflateInit() or die "Cannot create a deflation stream\n" ; my ($output, $status) ; while (<>) { ($output, $status) = $x->bzdeflate($_) ; $status == BZ_OK or die "deflation failed\n" ; print $output ; } ($output, $status) = $x->bzclose() ; $status == BZ_OK or die "deflation failed\n" ; print $output ; =head1 STREAM INFLATE Here is a definition of the interface: =head2 B<($i, $status) = inflateInit()> Initialises an inflation stream. In a list context it returns the inflation stream, B<$i>, and the I<zlib> status code (B<$status>). In a scalar context it returns the inflation stream only. If successful, B<$i> will hold the inflation stream and B<$status> will be C<BZ_OK>. If not successful, B<$i> will be I<undef> and B<$status> will hold the I<bzlib.h> error code. The function optionally takes a number of named options specified as C<-Name=E<gt>value> pairs. This allows individual options to be tailored without having to specify them all in the parameter list. For backward compatibility, it is also possible to pass the parameters as a reference to a hash containing the name=>value pairs. The function takes one optional parameter, a reference to a hash. The contents of the hash allow the deflation interface to be tailored. Here is a list of the valid options: =over 5 =item B<-small> B<small> may be 0 or 1. Set C<small> to one to use a slower, less memory intensive algorithm. =item B<-verbosity> Defines the verbosity level. Valid values are 0 through 4, The default is C<-verbosity =E<gt> 0>. =back Here is an example of using the B<bzinflateInit> optional parameter. bzinflateInit( -small => 1, -verbosity => 1 ); =head2 B<($out, $status) = $i-E<gt>bzinflate($buffer)> Inflates the complete contents of B<$buffer>. The buffer can either be a scalar or a scalar reference. Returns C<BZ_OK> if successful and C<BZ_STREAM_END> if the end of the compressed data has been successfully reached. If not successful, B<$out> will be I<undef> and B<$status> will hold the I<bzlib> error code. The C<$buffer> parameter is modified by C<bzinflate>. On completion it will contain what remains of the input buffer after inflation. This means that C<$buffer> will be an empty string when the return status is C<BZ_OK>. When the return status is C<BZ_STREAM_END> the C<$buffer> parameter will contains what (if anything) was stored in the input buffer after the deflated data stream. This feature is useful when processing a file format that encapsulates a compressed data stream. =head2 Example Here is an example of using B<bzinflate>. use strict ; use warnings ; use Compress::Bzip2; my $x = bzinflateInit() or die "Cannot create a inflation stream\n" ; my $input = '' ; binmode STDIN; binmode STDOUT; my ($output, $status) ; while (read(STDIN, $input, 4096)) { ($output, $status) = $x->bzinflate(\$input) ; print $output if $status == BZ_OK or $status == BZ_STREAM_END ; last if $status != BZ_OK ; } die "inflation failed\n" unless $status == BZ_STREAM_END ; =head1 EXAMPLES Here are some example scripts of using the interface. =head2 B<A bzcat function> use strict ; use warnings ; use Compress::Bzip2 ; die "Usage: bzcat file...\n" unless @ARGV ; my $file ; foreach $file (@ARGV) { my $buffer ; my $bz = bzopen($file, "rb") or die "Cannot open $file: $bzerrno\n" ; print $buffer while $bz->bzread($buffer) > 0 ; die "Error reading from $file: $bzerrno" . ($bzerrno+0) . "\n" if $bzerrno != BZ_STREAM_END ; $bz->bzclose() ; } =head2 B<A grep using bzreadline> use strict ; use warnings ; use Compress::Bzip2 ; die "Usage: bzgrep pattern file...\n" unless @ARGV >= 2; my $pattern = shift ; my $file ; foreach $file (@ARGV) { my $bz = bzopen($file, "rb") or die "Cannot open $file: $bzerrno\n" ; while ($bz->bzreadline($_) > 0) { print if /$pattern/ ; } die "Error reading from $file: $bzerrno\n" if $bzerrno != Z_STREAM_END ; $bz->bzclose() ; } =head2 B<Streaming Compression> This script, I<bzstream>, does the opposite of the I<bzcat> script above. It reads from standard input and writes a bzip file to standard output. use strict ; use warnings ; use Compress::Bzip2 ; binmode STDOUT; # bzopen only sets it on the fd my $bz = bzopen(\*STDOUT, "wb") or die "Cannot open stdout: $bzerrno\n" ; while (<>) { $bz->bzwrite($_) or die "error writing: $bzerrno\n" ; } $bz->bzclose ; =head1 EXPORT Use the tags :all, :utilities, :constants, :bzip1 and :gzip. =head2 Export tag :all This exports all the exportable methods. =head2 Export tag :constants This exports only the BZ_* constants. =head2 Export tag :bzip1 This exports the Compress::Bzip2 1.x functions, for compatibility. compress decompress compress_init decompress_init version These are actually aliases to memBzip and memBunzip. =head2 Export tag :utilities This gives an interface to the bzip2 methods. bzopen bzinflateInit bzdeflateInit memBzip memBunzip bzip2 bunzip2 bzcat bzlibversion $bzerrno =head2 Export tag :gzip This gives compatibility with Compress::Zlib. gzopen gzinflateInit gzdeflateInit memGzip memGunzip $gzerrno =head1 Exportable constants All the I<bzlib> constants are automatically imported when you make use of I<Compress::Bzip2>. BZ_CONFIG_ERROR BZ_DATA_ERROR BZ_DATA_ERROR_MAGIC BZ_FINISH BZ_FINISH_OK BZ_FLUSH BZ_FLUSH_OK BZ_IO_ERROR BZ_MAX_UNUSED BZ_MEM_ERROR BZ_OK BZ_OUTBUFF_FULL BZ_PARAM_ERROR BZ_RUN BZ_RUN_OK BZ_SEQUENCE_ERROR BZ_STREAM_END BZ_UNEXPECTED_EOF =head1 SEE ALSO The documentation for zlib, bzip2 and Compress::Zlib. =head1 AUTHOR Rob Janes, E<lt>arjay at cpan.orgE<gt> =head1 COPYRIGHT AND LICENSE Copyright (C) 2005 by Rob Janes This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.8.3 or, at your option, any later version of Perl 5 you may have available. =head1 AUTHOR The I<Compress::Bzip2> module was originally written by Gawdi Azem F<azemgi@rupert.informatik.uni-stuttgart.de>. The first I<Compress::Bzip2> module was written by Gawdi Azem F<azemgi@rupert.informatik.uni-stuttgart.de>. It provided an interface to the in memory inflate and deflate routines. I<Compress::Bzip2> was subsequently passed on to Marco Carnut F<kiko@tempest.com.br> who shepherded it through to version 1.03, a set of changes which included upgrades to handle bzlib 1.0.2, and improvements to the in memory inflate and deflate routines. The streaming interface and error information were added by David Robins F<dbrobins@davidrobins.net>. Version 2 of I<Compress::Bzip2> is due to Rob Janes, of arjay@cpan.org. This release is intended to give an interface close to that of Compress::Zlib. It's development forks from 1.00, not 1.03, so the streaming interface is not the same as that in 1.03, although apparently compatible as it passes the 1.03 test suite. Minor subsequent fixes and releases were done by Reini Urban, rurban@cpan.org. =head1 MODIFICATION HISTORY See the Changes file. 2.00 Second public release of I<Compress::Bzip2>.

• [DIR] Raw [Delete]
• [FILE] Bzip2.pm [Edit] [Rename] [Delete]